Install CyberPanel di Ubuntu 20.04

Dari Dokumentasi Robie
Revisi sejak 4 September 2023 15.00 oleh Robie (bicara | kontrib)
Loncat ke navigasi Loncat ke pencarian

Step 1: Update System Sebelum memulai proses instalasi, disarankan untuk mengupdate sytem untuk menginstall semua packages yang diperlukan, jalankan perintah berikut:

sudo apt-get update
sudo apt-get upgrade


Step 2: Install Required Packages

Untuk menginstall packages Cyberpanel, silakan ketik perintah berikut:

sudo apt-get install wget curl python python3-pip python-dev -y

lalu ketikkan perintah berikut

sudo su -

Step 3: Download and Install Cyberpanel

bash <(curl https://cyberpanel.net/install.sh || wget -O - https://cyberpanel.net/install.sh)


Tunggu Hingga Proses install selesai


grep: /usr/local/CyberCP/public/snappymail.php: No such file or directory
###################################################################
                CyberPanel Successfully Installed
                Current Disk usage : 8/9GB (89%)
                Current RAM  usage : 374/1983MB (18.86%)
                Installation time  : 0 hrs 27 min 0 sec
                Visit: https://180.248.0.189:8090
                Panel username: admin
                Panel password: *****
             Run cyberpanel help to get FAQ info
             Run cyberpanel upgrade to upgrade it to latest version.
             Run cyberpanel utility to access some handy tools .
              Website : https://www.cyberpanel.net
              Forums  : https://forums.cyberpanel.net
              Wikipage: https://docs.cyberpanel.net
              Docs    : https://cyberpanel.net/docs/
            Enjoy your accelerated Internet by
                CyberPanel & OpenLiteSpeed
###################################################################
If your provider has a network-level firewall
Please make sure you have opened following port for both in/out:
TCP: 8090 for CyberPanel
TCP: 80, TCP: 443 and UDP: 443 for webserver
TCP: 21 and TCP: 40110-40210 for FTP
TCP: 25, TCP: 587, TCP: 465, TCP: 110, TCP: 143 and TCP: 993 for mail service
TCP: 53 and UDP: 53 for DNS service
Your provider seems blocked port 25 , E-mail sending may not work properly.
Would you like to restart your server now? [y/N]: y

setelah restart lihat ip address server dengan mengetikkan perintah

robie@robie:~$ ifconfig
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.11  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::a00:27ff:feeb:d932  prefixlen 64  scopeid 0x20<link>
        inet6 2001:448a:5040:5a31:a00:27ff:feeb:d932  prefixlen 64  scopeid 0x0<global>
         ether 08:00:27:eb:d9:32  txqueuelen 1000  (Ethernet)
        RX packets 155  bytes 13969 (13.9 KB)
        RX errors 0  dropped 60  overruns 0  frame 0
        TX packets 60  bytes 9245 (9.2 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
robie@robie:~$